Loading ...
Loading ...
Loading ...
MOTOR SAFETY FILTER CLEANING 1
, WARNING
Electrical Shock Hazard
Turn off and unplug vacuum cleaner
from electrical outlet. Do not operate
the vacuum cleaner without the motor
safety filter. Be sure the filter is dry and
properly insta!led to prevent motor
failure and/or electrical shock.,
Check motor safety filter occasionally
and clean when dirty..
Io Remove the bag as outlined in the BAG
CHANGING section
_: 2oLift the rubber
retainer and pult
out motor safety filter
as shown
Re_er_
3.Wash filter inwarm soapy water, rinse,
then d_. Do not clean in dishwasher or
install while damp,,
_-.4_'_.___ . 4. Replace the filter by
sliding it back into
___ peaceunder the ribs in
._r\ Ji_\_ the bag cavity Tuck ill-
_:._. ter in so that it fits com-
_._!_ pletety under the rub-
_pu_,_ae_rr/-" ber retainer
5oReplace the bag as outlined in the BAG
CHANGING section.
EXHAUST FILTER CHANGING
WARNING
Fire andlor Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter or
exhaust filter cover installed_
HEPA EXHAUST FILTER
The exhaust filter cartridge must be
replaced when dirty. Replace the filter when
the entire surface area iscovered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for
Exhaust Filter number
1.Puleout and
up on the
exhaust filter
cover to remove
from the
canister and lay
aside.
16
3..Replace exhaust
filter cartridge
Place the new filter
cartridge into the
canister with the
foam seal facing
down towards the
canister
Tabs
2oPull the exhaust
filter cartridge up
and out from the
rear of the
canister..
Exhaust
&.Replace the
exhaust filter cover
by placing the 'two
tabs on the filter
cover into the slots
on the canister and
rotate into place
until it snaps
closed
Loading ...
Loading ...
Loading ...