GE - General Electric PGCS1PJXCSS User Manual

Loading ...

Installation Instructions

REMOVING THE FREEZER DRAWERS (cont.)

The freezer drawers can be removed, if needed, to

fit through tight areas.

Read these instructions completely and carefully.

BOTTOM DRAWER

[] REMOVE THE UPPER BASKET

[] Open the bottom freezer drawer until it stops.

[] Pull the basket out to the stop location.

[] Lift the basket up at the front to release it from

the slides.

[] Lift the back up and out of the slide.

REMOVE THE LOWER BASKET

[] Open the bottom freezer drawer until it stops.

[] Lift the rear of the basket up so the two rear

alignment tabs are pulled out of the slide bracket.

[] Rotate the basket up and out of the drawe[

[] REMOVE THE DRAWER FRONT FROM

THE SLIDES

[] Remove the 10 hex head screws from the door

and remove the door.

[] Set the drawer front on a non-scratching

surface.

[] Push the rail assemblies back into the cabinet.

[] REMOVE THE BASE GRILLE

lif needed)

If, after removing the freezer drawers and

refrigerator door, the refrigerator will still not fit

through a doorwag, the base grille can be

removed.

[] Remove the base grille bg removing the

2 Phillips head screws.

Loading ...

GE - General Electric PGCS1PJXCSS GE bottom-mount refrigerator