Loading ...
Loading ...
Loading ...
2
IMPORTANT SAFETY INSTRUCTIONS
When us}ng this machine, basic safety precaut}ens shouid always be followed including the following
Read aH instructions before using the machine
- To reduce the risk of electric shock:
. The machii_e shouid [lever be ieft unattended when p_ugged in Always unptug the machine from the
electric outlet immediateiy after using and before cleaning,
, Always unpiug before relamping Replace buib with the same type rated 15 watts Be stJre to replace the
face plate which covers the light bulb before operating the machine_
WARNING -To,educethe,skofburns,fire.e ectdc shock or iniury ,< persons
, Be sure tha[the electdca_ voitage of the e_ectric outlet (wail receptacle) is the same as the rated voltage of
the motor,
. Use this: machine only for its intended use as described in this Operator's Guide. Use only a_tachments
recommended by the manufacturer as contained in the Ope_atoCs Guide
To disconnect, turn a_l controls to the off (°0°) position, then remove plug from out_et
• Disconnec[ the power iine plug from the socket out_e_or switch the mach#_e off when making any adius[me_ts
in the needie area, such as threading needle and ioopers, changing needie, changing throat pinto or
changing presser foot, etc,
, Always unplug the machine from the eiectdcai out/el when removing covers, lubdcatir_g or when making
any other user serv cing adjustments mentioned in the Operato¢s Guide
. Do net attempt to adjust the motor bell. Contact your nearest Service Center should any adjustment be
required.
. Do not: unplug by patiing on cord. To unplug, grasp the piug_ not the cord.
. Handie the feet controller with care and avoid dropping it on the floor. Be sure not to piece anyt,hing on top
of it
, Always use the proper th_oat plate The wrong plate can cause the needle to break
. Do not use bent needles.
When sewing keep fingers away from at! moving parts_ Special care is required around the sewing
machine needle.
. Do not pull or push fabric while stitehing_ it may deflect the needle causing it to break.
• Use only the handle to lift and move the machine.
, Never operate the machine if it has a damaged cord or plug, if it is not working property if it has been
dropped o$ damaged or dropped into the water. Return the mact_ine to the nea_esf authorized deaer or
Service Center for examination, repair, electrical, or mechanical adjustment.
. Never operate the machine with any air openings blocked Keep ventilation openings d the machine and
foot contro!ier free from the accumulation of iint, dust and ioose cloth
, Never drop or insert any object i_to any opening.
Loading ...
Loading ...
Loading ...