Loading ...
Loading ...
Loading ...
CARTON CONTENTS
1. Lid
2. Tank
3. Wheels (2)
4. Axle
5. Hitch Tube, L.H.
6. Hitch Tube, R.H.
7. Hitch Brackets (2)
8. Boom Mount Bracket
9. Spray Gun Assembly
10. Boom Assembly
REMOVAL OF PARTS FROM CARTON
• Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on pages 3 and 4.
TOOLS REQUIRED FOR ASSEMBLY
(2) 1/2" Wrenches
(1) Screwdriver
(1) Pliers
(1) Hammer
• Assemble the hitch tubes to the tank using four 5/16"
x 1-1/2" hex bolts, 5/16" lock washers and bowed
washers. Place the bowed washers between the tank
and the hitch tubes. Do not Ughten yet. See figure 2.
• Fasten the hitch tubes together at the front using two
5/16" x 3" hex bolts, four 5/16" lock washers and two
5/16" hex lock nuts. Do not tighten yet. See figure 2.
• Assemble the axle clamps to the hitchtubes using
four curved head bolts, 5/16" lock washers and 5/16"
hex nuts. Do not tighten yet. See figure 1.
5/16" x 1-5/6"
CURVED HEAD BOLT
HITCH TUBE (LH)
r16" LOCK \
AXLE WASHER
CLAMP HITCH TUBE (RH)
5/16" HEX NUT
FIGURE 1
16"HEX
LOCK NUT
FIGURE 2
Loading ...
Loading ...
Loading ...