Loading ...
Loading ...
Loading ...
-4-
Do not use a power source exceeding
the machine’s specified value, only use
220V AC power!
The outlet used for the machine’s
current must be greater than the
machine’s specified value; otherwise
it may lead to overheating or fire.
When installing or repairing, the machine
must be disconnected from the power
source!
Otherwise it may lead to electric
shock.
The machine must be connected to a
reliable ground wire outlet and in
accordance with relevant
standards!
Failure to do that may result in electric
shock.
Do not touch the power plug with wet
hands!
It may lead to electric shock.
Notes
Do not use the water purifier when the
sewer is blocked up!
If it is used while the sewer is
blocked, it may cause the
waste water to back up or
pollution to get inside the
water purifier.
The waste water discharge pipe and
wastewater ratio device cannot be
blocked!
When the waste water discharge
pipes and waste water ratio device
are clogged, it may lead to high
TDS effluent, the RO membrane
may get blocked or the water
purifier may not work.
Water purifier inlet water temperature
should not exceed 38℃!
If the inlet water temperature
is over 38℃, it will damage
the reverse osmosis
membrane leading to
membrane failure.
Do not use in conditions under 5℃!
If the temperature in the room is
below 5℃, please be sure to
take measures to prevent
freezing, such as starting the
heater or air conditioner to
prevent leakage or cracked pipes caused from water
freezing inside the machine.
Do not use this water purifier outdoors!
If this water purifier is used
outdoors, it can lead to
accelerated aging of the
water purifier pipes and
parts, which can cause
leaking or machine failure.
Do not use the water purifier in direct
sunlight!
When the water purifier is in
sunlight for a period of time, it
may create a breeding ground for
microorganisms so the water
purifier water quality will
decrease, and they may pollute
the internal components of the water purifier.
Loading ...
Loading ...
Loading ...