Loading ...
Loading ...
Loading ...
REMOVING, REVERSING AND REPLACING
REFRIGERATOR DOORS (OPTIONAL)
NOTE: See the Parts and Features section
to match your model.
TOOLS NEEDED: 10mm hex-head socket wrench,
No. 2 Phillips screwdriver, flat-head screwdriver, 10mm
open-end wrench, fiat 2-inch putty knife.
IMPORTANT: Before you begin, turn the refrigerator OFF
and unplug it. Remove food and any adjustable door or
utility bins from doors.
HOW TO REVERSE DOOR OPENING DIRECTION
(when converting from the left-opening type to right-
opening type)
1. Removing Refrigerator Door
• Remove the top hinge cover (1).
• Remove the 3 screws and lift off the top hinge (2).
. Lift the Refrigerator door (3) slightly and remove it.
. Pry off the cover (4) using a slotted screwdriver and
attach it on the right.
• Loosen the screw (5), remove the stoppers (6) and
attach them on the left (on the opposite side).
" Loosen the pin (7) and remove it.
" Lift off the washer (8).
• Pry off the cover (9) using a slotted screwdriver and
attach it on the right.
2. Removing Freezer Door
° Lift the door (10) slightly and remove it.
, Loosen the 2 screws (1 1), the 2 screws (12), and lift
off the middle hinge (13).
• Take offthe base grille (14).
Remove the cap (15) and attach it on the right.
• Loosen the 2 screws (16), remove the bottom hinge
(17), and attach on the left.
o Loosen the 2 screws (18) and attach the stopper (19)
on the left side of the base.
?
/
/
/
/
/
/
,J
3. Removing Refrigerator Handle
NOTE: To assist in installing the handle on the right
side, place a small piece of masking tape near the
top of the handle before removing.
• Grasp the handle tightly with both hands and slide the
handle up (1)(this may require some force).
• The keyhole slots (2) on the back of the handle allow
the handle to separate from the mounting screws (3).
15
Loading ...
Loading ...
Loading ...