User Manual Elkay SWU1517BI 16 Inch Undermount Bar Sink with Fireclay Ma

Documents for Elkay SWU1517BI

The following documents are available:
User Manual Other Documents Photos
SWU1517BI photo
COUNTERTOP
UNDERLAYMENT
CABINET
SINK
1/4"
SILICONE CAULK
(NOT FURNISHED)
Elkay Fireclay
Undermount Sinks
CAREFULLY READ THESE INSTRUCTIONS BEFORE YOU BEGIN
ATTENTION INSTALLER
ELKAY recommends that Fireclay sinks should be installed by a professional experienced installer.
Before installation, please inspect the sink for damage. Do not install a damaged sink.
WARNING: Due to the dimensional variation inherent in the fireclay manufacturing process, sink cutout
templates are not provided. Elkay recommends using the actual sink for the countertop cutout. It is recom-
mended that you discuss with your customer the desired finished appearance of the sink and countertop
installation. Elkay is not responsible for improper sink and/or countertop installations.
It is recommended that you discuss with your customer and agree to what the finished effect will be. Elkay
is not responsible for improper sink or countertop installations.
Elkay Fireclay undermounts must be fastened to solid surface countertops only (i.e., granite).
Elkay is not responsible for sink and countertop if damaged during installation.
Fireclay sinks are heavy, please arrange for assistance to move or position.
Follow all local plumbing and building codes.
Fireclay Farmhouse Apron Undermount Sink Only
A custom sink base cabinet is required.
Proper installation requires a coordinated effort including advanced dialog between the designer (or
customer), the cabinet maker, the countertop fabricator and the sink installer during the design and instal-
lation phase.
Elkay recommends providing the cabinet maker with the actual sink to be installed prior to cabinet fabrication.
It is required that a support frame be constructed inside the cabinet for adequate support of the sink as
shown in Figure 1.
Warning: The support frame and proper support for the sink must sufficiently support 300 lbs. This is the
approximate weight of the sink when full.
Templates are not included however it is recommended that the sink countertop cutout provide a reveal into
the sink bowl opening as shown in Figure 2.
Installation Instructions
FRAMING MUST
SUPPORT SINK
BOWLS
FIGURE 1
FIGURE 2
Loading ...