Loading ...
Loading ...
Loading ...
19
Install the darning plate. (1)
Change the all purpose foot to the button sewing foot. (2)
Set the stitch length to ”0”.
Place the button and fabric under the Button Sewing foot, as
illustrated in (3).
Set the machine for zig-zag stitch. Adjust the dial until the
needle moves from the left hole into the right hole of the
button without interference. Turn the handwheel to check that
the needle goes cleanly into the left and right holes of the
button. Slowly sew on the button with about 10 stitches.
Raise the needle out of the fabric. Set the machine for
straight stitch again, then sew a few securing stitches to
nish.
If a shank is required, place a darning needle on top of the
button and sew (4). For buttons with 4 holes, sew through
the front two holes rst, push the work forward and then sew
through the back two holes.
Sewing on Buttons
Loading ...
Loading ...
Loading ...