Loading ...
Loading ...
3
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed as described in this
manual, so please read the manual carefully. To reduce the risk of fire, electrical shock, or injury
when using the appliance, follow basic precautions, including the following:
• Plug into a grounded 3-prong outlet, do not remove the grounding prong, do not use an adapter,
and do not use an extension cord.
• It is recommended that a separate circuit, serving only your appliance be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
• Never clean the freezer with flammable fluids. These fumes can create a fire hazard or
explosion.
• Do not store or use gasoline or other flammable vapors and liquids inside or in the vicinity of this
or any other appliance. The fumes can create a fire hazard or explosion.
• Do not use inflammable sprays in the vicinity of the appliance.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance, unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
• This appliance is CFC- and HFC-free and contains a small quantity of Isobutane (R600a), which
is environmentally friendly but flammable. It does not damage the ozone layer, nor does it
increase the greenhouse effect. Care must be taken during transportation and setting up of the
appliance that no parts of the cooling system are damaged. Leaking coolant can ignite and may
damage the eyes.
• In the event of any damage:
- Avoid open flames and anything that creates a spark,
- Disconnect from the electrical power line,
- Air the room in which the appliance is located for several minutes, and
- Contact the Service Department for advice.
- In case the power supply cord is damaged, it must be replaced by a service agent or a
similarly qualified person to avoid a potential hazard
• The more coolant there is in an appliance, the larger the room it should be installed in. In the
event of a leakage, if the appliance is in a small room, there is the danger of combustible gases
building up. For every ounce of coolant, at least 325 cubic feet of room space is required. The
amount of coolant in the appliance is stated on the data plate on the appliance. It is hazardous
for anyone other than an Authorized Service Person to carry out servicing or repairs to this
appliance.
• Take serious care when handling, moving, and using the appliance to avoid either damaging the
refrigerant tubing or increasing the risk of a leak.
• Replacing component parts and servicing shall be done by factory authorized service personnel
so as to minimize the risk of possible ignition due to incorrect parts or improper service.
Loading ...
Loading ...
Loading ...