Loading ...
Loading ...
Loading ...
English 21
Rollers are blocked.
Remove rollers and check if an ob-
ject is blocking rollers.
See "Cleaning the rollers".
Rollers are too dry.
Moisten rollers with 1,7 oz (0.05 l) of
water in storage station.
See „Start working“.
There are parts (e.g. stones or splin-
ters).
Remove suction head lid and clean
the suction head.
See Chapter "Cleaning the suction
head".
The suction ducts and slits on the suc-
tion head are blocked.
Remove suction head lid and clean
the suction head.
See Chapter "Cleaning the suction
head".
Waste water tank is overfilled.
Empty waste water tank.
See Chapter "Cleaning the waste
water tank".
Waste water tank does not fit properly.
Check whether cover is secure on
waste water tank.
See Chapter "Cleaning the waste
water tank".
Separator is blocked.
Remove cover from waste water
tank and clean separator.
See Chapter "Cleaning the waste
water tank".
The filter net of the waste water tank
separator was damaged during clean-
ing.
Replace separator.
Detergent used was not effective or im-
properly used.
Only use detergents approved by
KÄRCHER.
See chapter "Using detergents".
Follow the manufacturer's dosage
instructions.
Initial moistening of rollers.
Completely moisten rollers.
ATTENTION
Do not remove handle from the device
once assembled.
The handle may only be removed if
shipping service purposes.
Insert screwdriver at a 90 degree
angle in small opening at rear of de-
vice and simultaneously pull handle
up until it slides off.
ATTENTION
Please ensure cord between body and
handle are not damaged.
Rollers do not turn
Loud rattling when powered on
Noise in suction head
Suction power decreases
Appliance leaking waste water
Streaks on floor
Removing handle from device
Loading ...
Loading ...
Loading ...