Loading ...
Loading ...
Loading ...
1-800-944-9044(United States) / Visit our web site at
1-800-265-8352 (Canada) l www.frigidaire,com,
Before calling for service, review this list. Itmay save you time and expense. This list includes com-
mon occurrences that are not the result of defective workmanship or materials in this appliance.
PROBLEH [ CAUSE T CORRECTION
APPLIANCE OPERATION
Appliance
does not run.
Appliance
runs too much
or too long.
• Appliance is plugged into a
circuit that has a ground
fault interrupt.
Temperature Control isin the
OFF position.
Appliance may not be
plugged in or plug is loose.
House fuse blown or tripped
circuit breaker.
Power outage.
- Room or outside weather
is hot.
o Appliance has recently been
disconnected for a period
of time.
- Large amounts of warm
or hot food have been
stored recently.
- Door is opened too frequently
or too long
- Door may be slightly open.
- Temperature control is set
too low.
Gaskets are dirty, worn,
cracked, or poorly fitted.
APPLIANCE TEHPERATURES
Use another circuit. If you are unsure
about the outlet, have it checked by a
certified technician.
See ELECTRONIC CONTROL section.
Ensure plug istightly pushed into outlet.
Check/replace fuse with a 15-amp time-delay
fuse. Reset circuit breaker.
Check house lights. Call local electric company.
It's normal for the appliance to work longer
under these conditions.
Ittakes 24 hours for the appliance to cool
down completely.
Warm food will cause appliance to run more
until the desired temperature is reached.
- Warm air entering the appliance causes it to
run more. Open door less often.
See "DOOR PROBLEHS".
Turn control knob to a warmer setting. Allow
several hours for the temperature to stabilize.
Clean or change gasket. Leaks in door seal
will cause appliance to run longer in order to
maintain desired temperatures.
Interior ap- , Temperature control is set , Set control to a warmer setting. Allow several
_Eance tern-too low. hours for temperature to stabilize.
)erature is ,
too cold.
Temperature
inside appli-
ance is too
e
warm,
e
e
e
"LO" is
displayed on
control.
"E7", "E8",
"E9" is
displayed on
control.
Temperature control isset Turn control to a colder setting. Allow several
too warm. hours for temperature to stabilize.
Warm air enters the appliance every time the
door is opened. Open door less often.
See "DOOR PROBLEHS".
Wait until the appliance has had a chance to
reach its selected temperature.
Appliance requires 24 hours to cool
down completely.
, Control has been locked. , Press the CONTROL LOCK key for three
The control has registered an • For toll-free telephone support in the U.S.
error code. and Canada: 1-800-374-4432
Door is opened too frequently
or too long.
Door may not be seating properly.
Large amount of warm or hot
food has been stored recently.
Appliance has recently been dis-
connected for a period of time.
Loading ...
Loading ...