Loading ...
Loading ...
Loading ...
Before gou call for service...
Passible Cause What To Do
Incomplete cgcle ortimer Automatic load redistribution • Timeradds ] minutes to cgcle for each rebalance.
not advancing 1! or 15 rebalancesmay be done.This is normal operation.
Do nothing;the machine will finish the wash cycle.
Pump clogged • Seepage 13 on how to clean the Pump Filter.
Drain hose is kinked or • Straighten drain hose and make sure washer is not
improperly connected sitting on it.
Household drain may • Check household plumbing. You may need to call
be clogged a plumber.
Drain hose siphoning; drain hose • Ensurethere is an air gap between hose and drain.
pushed too far down the drain
Loud or unusual noise; Cabinet moving • Washer is designedto move 1/4" to reduce forces
vibration orshaking transmitted to the floor.Thismovement is normal.
All rubber leveling legs are not • Pushand pull on the back right and then back left of gour
firmlg touching the floor washer to check if it islevel. If the washer is uneven,adjust
the rubber leveling legsso theu are all firmly touching the
floor and locked in place.Yourinstaller should correct this
problem.
Unbalanced load • Opendoor and manually redistribute load.To check
machine, run rinseand spinwith no load. Ifnormal,
unbalance was caused bg load.
Pump clogged • Seepage 15 on how to clean the Pump Filter.
No power/washer no-t Washer is unplugged • Make surecord is plugged securelg into a working outlet.
working or dead Water supplgis turned off • Turn both hot and cold faucets fullg on.
Circuit breaker/fuse is • Check house circuit breakers/fuses. Replacefuses or
tripped/blown reset breaker.Washer should have separate outlet.
Automatic self sgstem checks • Firsttime the washer is plugged in, automatic checks
occur. It may take up to 20 seconds before you can use
your washer.This is normal operation.
Snags, holes, tears, tips Overloaded • Do not exceed maximum recommended load sizes.
or excessive wear Seerecommended maximum load sizeson page 11.
Pens,pencils, nails, screws or • Removeloose items from pockets.
other objects left in pockets
Pins,snaps, hooks, sharp • Fastensnaps, hooks, buttons and zippers.
buttons, belt buckles, zippers
and sharp objects left in pockets
ControJtime wrong This is normal • Duringspin the washer may need to rebalance the load
or changes sometimes to reducevibrations. When this happens,
the estimated time is increasedcausing time left to
increaseor jump.
Not enough water This is normal • Horizontalwashers do not require the tub to fill with water
like top-load washers.
Washer pauses or has Pump clogged • Seepage 15 on how to clean the Pump Filter.
to berestarted, or washer
door is locked and will
not open
Door unlocks or This is normal • Front-load washers start up differently than top-load
press STARTandmachine washers, and it takes 50 seconds to check the system.
doesn't operate Thedoor will lock and unlock.
Incorrect operation • Simply open and closethe door firmly; then press START.
22
Loading ...
Loading ...
Loading ...