Loading ...
Loading ...
Loading ...
10
Performance problems often result from little things you can find and fix yourself without tools of any kind.
SOLUTION
• Is the power cable plugged into a live socket with the proper
voltage?
• Have you checked the protection devices and fuses of the
electrical system in your home?
If there is water in the defrost pan: • This is normal in hot, damp weather. The pan can even be half
full. Make sure the appliance is level so that the water does not
overflow.
cabinet, which come in contact with
the door seal, are warm to the touch:
• This is normal in hot weather and when the compressor is
running.
• Have you checked the protection devices and fuses of the
electrical system in your home?
• Is the power cable plugged into a live socket with the proper
voltage?
• In case the LEDs are broken the user must call the Service for
exchange of the same type available only at our After-sales
Service Centers or authorized dealers.
If the motor seems to run too much: • Motor running time depends on different things: number of door
openings, amount of food stored, temperature of the room, setting
of the temperature controls.
• Is the condenser (back the appliance) free of dust and fluff?
• Are the door properly closed?
• Are the door seals properly fitted?
• On hot days or if the room is warm, the motor naturally runs
longer.
• If the appliance door has been left open for a while or if large
amounts of food have been stored, the motor will run longer in
order to cool down the interior of the appliance.
If the appliance temperature is too
• Are the appliance controls correctly set?
• Has a large amount of food been added to the appliance?
• Check that the door is not opened too often.
• Check that the door close properly.
If the doors do not open and close
properly:
• Check that food packages are not blocking the door.
• Check that the internal parts or automatic ice maker are not out of
position.
• Check that the door seals are not dirty or sticky.
• Ensure the appliance is level.
In the event of operation alarms, they will also be displayed in the digits LEDs, (e.g. Failure1, Failure 2, etc...) call
After-sales Service and specify the alarm code. The acoustic alarm sounds, the Alarm icon
lights up and the F
letter on the digit display blinks according to failure code described below:
Error 2
F letter blink on/off at 0,5 sec. Blinks ON 2 times
then remain off for 5 seconds. Pattern repeats.
x2
Error 3
F letter blink on/off at 0,5 sec. Blinks ON 3 times
then remain off for 5 seconds. Pattern repeats.
x3
Error 6
F letter blink on/off at 0,5 sec. Blinks ON 6 times
then remain off for 5 seconds. Pattern repeats.
x6
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.
Loading ...
Loading ...
Loading ...