Loading ...
Loading ...
Loading ...
Power on your Device
Turn on the power connected to the
ceiling mount bracket. The LTE WiFi
Router will be turned on automatically
upon receiving power.
NOTE: You may login to the device
software and disable the auto power on
feature in the configuration software.
The default setting is Enabled.
If the device is turned off, press and hold
the POWER button on top of the device
for about 4 seconds to turn it on.
Connecting to the Device
Your LTE WiFi Router supports auto-
switch between 4G LTE and External
WiFi. One of the following two methods
can be chosen to link your LTE WiFi
Router with a PC or any other smart
devices which can access to the internet:
WiFi Connection
1. Scan for wireless networks on your
mobile device or laptop. It may take
a few minutes for the network to
appear.
2. Select Local WiFi network with
SSID: FURRIONAP_xxxxxx
Password: FAxxxxxx
The “xxxxxx” in the example above
corresponds to the last 6 characters
of the unique network ID address.
The default password can be found on
the SSID/WPA sticker.
3. Click Join.
LAN Connection
Depending on your RV dealer, you can
connect the Furrion Access through the
assigned Ethernet Socket.
Login
The default IP of this 4G LTE WiFi Router
is 192.168.0.1 with subnet 255.255.255.0.
Make sure the PC attached to this
router is in the same subnet and has
an IP address in the range between
192.168.0.2~ 192.168.0.254.
1. Launch a web browser and enter
192.168.0.1 in the address bar, the
login window will pop up.
http://192.168.0.1
2. Enter the default username: admin
and password: admin.
Username:
Password:
Login
Cancel
3. Click Login.
8
English
Device Configuration
Loading ...
Loading ...
Loading ...