PGS A30NG 20 Inch Stainless Steel Freestanding Grill

User Manual - Page 21

For A30NG.

PDF File Manual, 27 pages, Read Online | Download pdf file

A30NG photo
Loading ...
Loading ...
Loading ...
21
YELLOW TIPPING
Properly adjusted burner
NORMAL HARD FLAMES
Slightly out of adjustment burner
YELLOW FLAMES
Extremely out of adjustment burner
HELPFUL TIPS
1. Before using your grill for the first time, please light
and turn both burners on HI heat for ten to fifteen
minutes. This will burn off any oils that are on new
surfaces. Before grilling, we suggest putting a light
coat of vegetable oil on your cooking grids. This
should be done before you turn on your grill. A spray
on oil, safflower or similar oil will work just fine.
2. Burning unit after each use is not required or
recommended. Extended burning may cause
premature wear on components or may damage your
unit if left unattended. Pre-heating grill 5-7 minutes
before each use will burn off most residue.
After the cooking grid has cooled, we recommend that
you lightly rub the cooking grid with a nylon cleaning
pad or similar material to remove any baked on foods.
Please remember to lightly oil the cooking grid with a
spray on oil, vegetable or safflower oil before using
the next time.
If your grids have a lot of food on them, you may want
to put them in a plastic bag with a cup of ammonia
and leave them in the sun for a day... be sure to wash
them thoroughly before using.
YOU MAY CLEAN YOUR STAINLESS STEEL
COOKING GRIDS WITH A BRASS WIRE BRUSH.
DO NOT PLACE COOKING GRIDS, ROCK GRATES
OR ROCK IN A SELF-CLEANING OVEN.
ALWAYS KEEP YOUR GRILL COVERED WHEN
NOT IN USE.
ORIFICE ENGAGEMENT
VALVE VENTURI
GAS VALVE AIR
LINE IN ORIFICE SHUTTER
Figure 38 Proper orifice engagement
At the end of each valve there is a tiny gas opening
known as an orifice. Gas exits the orifice and enters
the venturis where it mixes with air. The proper
mixture of gas and air produces a clean blue flame
with slight yellow tips from the burner.
BE CERTAIN THAT ORIFICES ARE ENGAGED
INTO THE BURNER VENTURIS (see Fig. 38).
Proper orifice engagement should be 1/4" to 3/8" into
the venturis.
FAILURE TO PROPERLY ALIGN THIS
CONNECTION MAY CAUSE A FIRE AND
RESULT IN DAMAGE TO YOUR GRILL.
GAS CONNECTION WILL REQUIRE LEAK CHECK
UPON ASSEMBLY COMPLETION.
GAS GRILL CONVERSION
We strongly recommend having your gas grill
converted by a servicing dealer, your local gas utility
or other trained personnel.
Loading ...
Loading ...
Loading ...