Loading ...
Loading ...
Loading ...
5
Remote Control –
Be sure to remove the
clear pull tab before
using the remote.
The functions on the
Remote Control mirror
those on the humidier.
When using the Remote
Control, you can control
the humidier from your
desired location.
Operating Instructions
WARNING: DO NOT operate the humidier without water in the tank.
WARNING: NEVER lift the tank o the Base while the unit is operating.
Extension Nozzle – To convert this unit from a Tabletop unit to Floor unit simply remove the Dual
Directional Mist Nozzle from the top of the Water Tank. Place the unit on your desired oor area and
insert the Extension Nozzle into the Top of the Water Tank. Then place the Dual Directional Nozzle
on the top of the Extension Nozzle.
WARNING:
Be sure the unit is unplugged and turned OFF
when changing the Nozzles.
Mist Output
–
When you turn the unit ON, it will default to the lowest mist setting. Pressing the “Mist” button will
increase the output. Press once for Medium, twice for High, three times for Supreme, four times for the Turbo Set-
ting. Pressing the Mist button a fth time will bring the unit back to Low
. NOTE: Turbo setting is intended for
those wanting a more powerful mist and works best while the Extension Nozzle is being used. The
Turbo setting will operate for 40 minutes and will then go to the Supreme Mist Setting. User must
wait 20 minutes before Turbo setting can be used again.
1
6
7
8
5
4
3
The Delay Start and Auto-O buttons allow you to set the humidier to turn ON and OFF automatically as
desired.
Delay Start – The Delay Start feature allows you to program the unit to turn ON automatically.
To use, press the “Delay Start” button once; you will see “Delay Start” 01:00H illuminated on the
display. This feature works in 1 hour increments and is programmable up to 24 hours. Simply keep
pressing the Delay Start button until you get to your desired delay start time, once you have reached
the time the display will ash three times and then will start to countdown until the unit turns ON.
Auto-O –
The Auto-O feature allows you to run the humidier
now and set it to turn OFF at a specic time automatically (in 1 hour
increments from 1-24 hours).To use - press the “Auto-O’ button once;
you will see “Auto-O” 01:00H illuminated on the display. This feature
works in 1 hour increments and is programmable up to 24 hours.
Simply keep pressing the Auto-O button until you get to your desired
Auto-O time, once you have reached the time the display will ash
three times and then start to count down until the unit turns OFF. The
display will start alternating between the current ambient humidity and
the Auto-O Timer. NOTE: You can use the Delay Start and Auto-O
functions together on this fully programmable LED Display to program
the humidier to turn ON and turn OFF at your desired times.
Beep/Dim –
The humidier automatically defaults to an audible beep when changing settings,
the waterless indicator will illuminate and you will hear three beeps when the humidier is out of water
and the LED Display will be illuminated.To disable one or more of these settings, follow the steps below:
Press Beep/Dim once to disable all sound (Beep O will ash on the display three times and then will
remain on the display to indicate the sound is OFF). Press the button twice to turn the LED Display OFF
(sound will remain OFF) and press a third time to enable the LED Display and the sound (default function).
Low Water –
When the tank is out of water the “waterless” indicator will appear in the display, you will
hear three beeps and the automatic safety shut-o will turn the Ultrasonic Nebulizer & unit OFF. Note: You
can disable the audible beep by pressing the Beep/Dim button once. To re-enable, press the Beep/Dim button two
more times.
ON/OFF –
Plug in to a standard (120V AC) electrical outlet. The LED Display will turn on for 2 seconds then
turn OFF. Press the ON/OFF button once and the “Operating” indicator will turn ON. Mist may not appear
immediately; allow up to 15 minutes for the water in the tank to transfer to the base.
NOTE: During the rst use you may hear several beeps and the waterless indicator may illuminate before
mist appears.
Humidistat –
By using this feature the humidier will automatically monitor and control the humidity level
according to your desired setting. Once the desired humidity level is reached the mist will shut OFF until the
humidity drops below the setting and then the mist will turn back ON automatically to maintain the humidity
level desired. To set this feature press the “Humidistat” button to your desired setting. Settings range from
40%-95% RH (Relative Humidity) in 5% RH increments. A 40%-60% Relative Humidity is recommended.
Once you set your desired humidity, the number will ash three times and then the display will revert back
to the Relative Humidity. To view the set humidity level, press the Humidistat button once.
2
Extra Features
Safety Shut O
Automatic Use
Manual Use
Loading ...
Loading ...
Loading ...