Hotpoint UH6 F1C W 1 Freezer - White

User Manual - Page 7

For UH6 F1C W 1.

PDF File Manual, 24 pages, Read Online | Download pdf file

UH6 F1C W 1 photo
Loading ...
Loading ...
Loading ...
7
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.
2.9. FREEZE CONTROL*
Freeze Control is an advanced technology that
reduces temperature fluctuations in the whole freezer
compartment to minimum, thanks to an innovative air
system, totally independent from the fridge. Freeze burns
are significantly reduced and food preserves its original
quality and color.
To activate the Freeze Control choose the function from
the menu, set to >ON< and press OK button to confirm
the selection. To deactivate this function repeat the
same procedure setting to >OFF<.
The function works properly in a defined range of
temperature: between -22°C and -24°C.
When the function is engaged and the current
temperature in the freezer is set to the warmer set point
than -22°C, the temperature is automatically set to -22°C
to match the working range.
If the function is engaged and the user modify the
freezer temperature out of the working range, the
function is automatically switched off.
In case of Fast freezing is engaged, the function “Freeze
control” is inhibited until the Fast Freezing function
switched off.
2.10. AUTOMATIC NO FROST
This product is designed to defrost automatically
according to conditions of use and ambient humidity.
No Frost freezers provide chilled air circulation around
the storage areas and prevent the formation of ice,
thereby completely eliminating the need for defrosting.
Frozen items don’t stick to the walls, labeling stays legible
and storage space remains neat and clear.
In combination with ProFreeze, not only does it control the
sensor, but directs the cooling power exactly where it is
needed, optimizing energy efficiency.
2.11. ICE MATE*

You can remove the ice cube tray by pulling it towards
you.
WARNING: fill with potable water only (maximum level
= 2/3 of the overall capacity).
or
Place again the Ice Mate in freezer compartment, or
reinsert the ice cube tray within the Ice Mate. Take care
not to spill water.
Wait until the ice cubes are formed (it is recommended
to wait for about 4 hours).
NOTE: Ice Mate is removable. It can be placed
in horizontal position anywhere in the freezer
compartment or taken out of the appliance when ice-
making is not required.
Loading ...
Loading ...
Loading ...