Loading ...
Loading ...
Loading ...
7
Prior to turning on the gas, inspect the gas supply tubing or hose. Look for evidence of abrasion, cuts, wear and tear, or
other damage which could require replacement prior to use. Make sure all burner control knobs are off. Do not attempt to
light the burners if the smell of gas is present.
Check the connection with a soap and water solution after attaching the hose. Make sure there is gas in the tank and the
tank is upright.
Before Lighting Grill
Getting Started
CAUTION
Wait at least five minutes before relighting a hot grill to allow any
accumulated gas to dissipate. Keep a spray bottle of soapy water near
the gas supply valve and check the connections for gas leaks before
each use.
Place center of briquette
tray onto locating tab of
the support brackets.
Briquette
Tray
Support
Bracket
Flash
Tube
Briquette Trays Proper Installation
Note: The flash tube must be accessible through the plates. If the flash tube is not accessible, the trays are not properly installed.
Using Grill with Outdoor Approved Hoods
• Outdoor approved hood models should be installed in a covered yet non-enclosed (well ventilated) area. Outdoor hoods aid
greatly in smoke and odor removal, but should not be expected to eliminate entirely. They should also be protected from
natural elements (such as rain) as much as possible.
• ALWAYS turn the outdoor hood to the “HIGH” position before lighting the grill.
• Keep the grill canopy closed as much as possible when cooking so smoke is exhausted out the back of the grill. This allows
optimum performance of the hood.
• During breezy conditions, the performance of the outdoor hood may be compromised.
Loading ...
Loading ...
Loading ...