Loading ...
Loading ...
Loading ...
Installation
Ducted air exhaust system
Note: The device manufacturer does not assume any warranty for complaints
attributable to the pipe section.
• The device achieves its optimum performance by means of a short, straight
exhaust air pipe and as large a pipe diameter as possible.
• As a result of long rough exhaust air pipes, many pipe bends or pipe diameters
that are smaller than 150 mm, the optimum extraction performance is not
achieved and fan noise is increased.
• The pipes or hoses for laying the exhaust air line must consist of non-
combustible material.
Round pipes
An inner diameter of 150 mm, but at least 120 mm, is recommended.
Flat ducts
The inner cross-section must correspond to the diameter of the round pipes.
diameter 150 mm ca. 177 cm2
diameter 120 mm ca. 113 cm2
• Flat ducts should not have any sharp deflections.
• Use sealing strips for deviating pipe diameters.
Note: If using an aluminium pipe, smooth the connection area beforehand.
Exhaust-air pipe Ø 150 mm (recommended size & supplied with the product)
• Attach the exhaust-air pipe directly to the air-pipe connector and seal using
sufficient pipe clamps (not supplied). The product is supplied with a ɸ 150 mm
flexible pipe
11
Loading ...
Loading ...
Loading ...