Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE _,_ _-_ ,_,_ _ _-_. ,_
AS YOU COMPLETE
REGULARSERV,OE DATES
Check Brake Operation _1_
Check Tire Pressure
Check Operator Presence and
T Interlock Systems I_
R Check for Loose Fasteners I_ 1_5 I_'
Sharpen/Replace Mower Blades _3
T Lubrication Chart
0 Check Battery Level 1_4
R Clean Battery and Terminals _, t_
Check Transaxle Cooling
Check V-Belts I_
Check Engine Oil Level I1_ I_
Change Engine Oil (with oil filter) I1_1,_ ql_
E Change Engine Oil (without oil filter) 1_,2
N Clean Air Filter _1_:
Clean Air Screen
NI Inspect Muffler/Spark
ii
Arrester
E ReplaceOilFilter(Ifequipped) _i
Clean Engine Cooling Fins
Replace Spark Plug _ t_'
Replace Air Filter Paper Cartridge
Fuel Filter if
Replace
lr
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Se _'ice more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soiL
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot holt to 35 ft.qbs, maximum.
DO not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your trac-
tor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
(9 Spindle--
t-z,.-,
Zerk i _"-'
_)Front Wheel :-'
Bearing _,_
Zerk _,j_
_Engine',.-_-, '
I ,'
i I
I I
i I
i I
I I
i I
I • ....
/ j "I _Front Wheel
:======' / ,_earing Zerk
",'.) i
i!
@ General Purpose Grease
Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
18
Loading ...
Loading ...
Loading ...