Loading ...
Loading ...
Loading ...
10
(7) Troubleshooting
Warning: Service must be performed by an authorised
competent person.
Fault
Cause
Solution
Light on, but motor
does not work
The flaps are blocked
Remove the blockage.
The capacitor is damaged
Call for service.
The motor is jammed due to
bearing damage
Call for service.
There is a bad smell coming
from the motor
Call for service.
Light does not work,
motor does not work
Beside the above mentioned, check the following:
Light damaged
Call for service.
Power cord not connected
Check plugged in and
switched on that power is
available.
Oil leakage
Filters saturated with cooking
oils.
Clean the filters.
Leakage between the
connection of U-shaped
section and canopy
Remove U-shaped
section and seal
Vibrations
The flaps are damaged and
causes shaking
Call for service.
The motor is not fixed
securely to the canopy body
Call for service.
The canopy body is not fixed
securely to the wall
Notify your installer.
Insufficient suction
The distance between the
canopy and the cooking
surface is too much
Notify your installer.
Too much ventilation from
open doors or windows
Close doors or windows,
choose an alternative
location, if possible,
away from draughts.
The Canopy inclines
The fixing screws are not
tight enough
Notify your installer.
The hanging screws are not
tight enough
Notify your installer.
Loading ...