Loading ...
Loading ...
Loading ...
12
C
leaning
Removing the bottom shelf
Pull the shelf upwards on
the right and left at the back
and then remove it towards
you.
• Cleantheinsideofthe
appliance and equipment
parts with lukewarm water
and a little detergent.
• Thoroughlydryallparts
with a cloth.
• Do not damage or remove the model plate on the
inside of the appliance. It is very important for servic-
ing your appliance.
Cleaning the appliance interior
Remove the glass shelves. Lift at the front and then
remove the shelf towards you.
Inserting the grid shelf
Extend the pull-out rails as far as they will go. Place the
front recesses of the shelf on the securing pins.
Slide the shelf together with the pull-out rails into the
appliance as far as they will go.
Push the shelf downwards on the right and left at the
back and click into place.
Cleaning
WARNING!
• Topreventpossibleinjuryduetoan
electrical shock, be sure to disconnect the
power cord or turn off the circuit breaker
before cleaning the appliance.
• Toavoidinjuryordamage,donotusesteam
cleaningequipmenttocleantheappliance.
Cleaning the appliance outside
• Cleanthedoorsurfacewithacleanandsoftcloth.If
necessary, use a moist cloth (water + detergent).
• Useaglasscleanertocleantheglasssurface.
IMPORTANT
Do not use abrasive or scouring pads or sponges.
Do not use concentrated cleaning agents.
Never use abrasive or acid-based cleaners or
chemical solvents.
1. Remove the ventilation
grille from the toe kick
panel.
2. Clean the dust filter
using a vacuum cleaner.
3. Reattach the ventilation
grille.
The dust filter in the appliance base must be
cleaned at least once a year.
1.
2.
Loading ...
Loading ...