Loading ...
Loading ...
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING To reduce the risk of fire, electrical shock or injury when
using your appliance, follow these basic precautions
Read all instructions before using the Beverage Center.
Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter,
and do not use an extension cord.
It is recommended that a separate circuit, serving only your Beverage Center, be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean Beverage Center parts with flammable fluids. These fumes can create a fire
hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the Beverage Center or disconnect the power before cleaning or servicing. Failure to
do so can result in electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or
any other appliance. The fumes can create a fire hazard or explosion.
Use two or more people to move and install the Beverage Center. Failure to do so can result
in back or other injury.
To ensure proper ventilation for your appliance, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 61
°
F (16
°
C) and below
95
°
F (35
°
C). [The unit performs best when the ambient temperature is in the range 66 – 75°F
(19º – 24ºC).] This unit must be installed in an area protected from the elements, such as wind,
rain, water spray or drips.
The Beverage Center should not be located next to ovens, grills or other sources of high heat.
For optimum energy conservation, locate the Beverage Center in the coolest area of the room,
away from heat- producing appliances and out of direct sunlight.
The Beverage Center must be installed with all electrical connections in accordance with state
and local codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is required.
Do not kink or pinch the power supply cord of the appliance.
The fuse (or circuit breaker) size should be 15 amps.
It is important for the Beverage Center to be leveled in order to work properly. You may need to
make several adjustments to level it.
Loading ...
Loading ...
Loading ...