Loading ...
Loading ...
Loading ...
KNOW YOUR CHAIN SAW
READ THIS operator's manual AND SAFETY RULES BEFORE OPERATING YOUR CHAIN
SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Chain Front Handle
Adjustment Tool Front Hand Guard. Starter Rope
(Bar Tool) _-
ON/STOP
Switch Choke/
Fast Idle
Chain Muffler Lever
/
Bar Bar Oil Fill Cap _ I
Sprocket
Hole
Throttle
Lockout
Rear \
Handle
/
Starter Housing Fuel Mix Fill Cap
Cylinder,Cover Chain
_ Brake
Primer Bulb
Chain
Direction
of Travel
Throttle / Chain
, Catcher
Trigger Clutch Cover Bar Nuts
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop
the engine.
THROTTLE TRIGGER
The THRO-FILE TRIGGER controls en-
gine speed.
THROTTLE LOCK-OUT
The THRO-FILE LOCK-OUT must be
pressed before you can squeeze the
throttle trigger. This feature prevents you
from accidentally squeezing the trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idle are set by pull-
ing the CHOKE/FAST IDLELEVER out to
the full extent for cold starting or after
refueling. The choke provides additional
fuel to the engine during cold starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the
carburetor to provide quicker starting.
A
!
Guide Bar
CHAIN BRAKE
The CHAIN BRAKE is a device designed
to stop the chain if kickback occurs. The
chain brake activates automatically in
the event of kickback. The chain brake
activates manually if the front hand
guard is pushed forward. The chain
brake is disengaged by pulling the front
hand guard back toward the front handle
as far as possible.
CHAIN TENSION
It is normal for a new chain to stretch
during the first 15 minutes of operation.
You should check your chain tension
each time before you start the chain
saw. See CHAIN TENSION under the
MAINTENANCE section.
,_WARNING: Ifthe saw is oper-
ated with a loose chain, the chain
could jump offthe guide bar and result
in serious injury to the operator and/or
damage the chain making it unusable.
7
Loading ...
Loading ...
Loading ...