Loading ...
Loading ...
Loading ...
9
DOOR REMOVAL/REVERSAL (SOME MODELS)
NOTE
Place the door on a padded surface to
avoid damage.
Figure 2
Bottom
Figure 3
Door
Stopper
Door
Stopper
Screw
Bottom Hinge
Pin
Figure 4
2. Gently pry the hinge bearing out
from the door with a flat head
screwdriver. Install the hinge bearing
on the opposite side of the door.
Remove the door from the unit by
lifting it up (see Figure 2).
3. Flip the door over to access the
bottom. Remove the screw from the
hinge bearing and the door closer
(see Figure 3).
4. Using a flat head screwdriver, gently
pry the closer/bearing assembly out
of the door (see Figure 3).
5. Separate the door closer and hinge
bearing (see Figure 3).
6. Flip the door closer over 180º and
reinstall the closer onto the bearing
(see Figure 3).
7. Reinstall the closer/bearing assembly
to the opposite side of the door and
reinstall the screws (see Figure 3).
8. Gently bend the tabs of the hinge
cover out while pulling the cover to-
wards the front of the unit to remove.
9. Remove the screw from the door
stop. Using a flat head screwdriver,
gently pry the door closer o of the
lower hinge pin. Using an adjustable
wrench, remove the lower hinge pin
(see Figure 4).
Loading ...
Loading ...
Loading ...