Loading ...
Loading ...
Loading ...
14
GB
Care and maintenance
Cutting off the water or electricity
supply
• Turn off the water tap after every wash. This will limit
the wear of your appliance’s water system and also
prevent leaks.
• Unplug your appliance when cleaning it and during all
maintenance operations.
Cleaning your appliance
The exterior and rubber parts of your appliance can be
cleaned with a soft cloth soaked in lukewarm soapy wa-
ter. Do not use solvents or abrasives.
Cleaning the detergent dispenser
Remove the dispenser by
pulling it out (see figure).
Wash it under running wa-
ter; this operation should
be repeated
frequently.
Caring for your appliance door and drum
• Always leave the appliance door ajar to prevent unple-
asant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-cleaning pump
that does not require any maintenance. Sometimes, small
items (such as coins or buttons) may fall into the pre-
chamber that protects the pump, situated in the lower
part of the same.
! Make sure the wash cycle has ended and unplug the
appliance.
To access the pre-chamber:
1. unscrew the lid rota-
ting it anti-clockwise (see
figure): a little water may
trickle out. This is perfectly
normal;
2. clean the interior thoroughly;
3. screw the lid back on.
Checking the water inlet hose
Check the water inlet hose at least once a year. If you
see any cracks, replace it immediately: during the wash
cycles, water pressure is very strong and a cracked hose
could easily split open.
! Never use hoses that have already been used.
1
2
Loading ...
Loading ...
Loading ...