Craftsman 917289361 tractor yts4000

User Manual - Page 30

For 917289361.

PDF File Manual, 64 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE CORRECTION
Headlight(s) not 1 Light switch is "OFF". 1 Turn light switch "ON".
working 2 Bulb(s) or lamp(s) burned out. 2 Replace bulb(s) or lamp(s).
(if so equipped) 3 Faulty light switch. 3 Check/replace light switch.
4 Loose or damaged wiring. 4 Check wiring and connections.
5 Blown fuse. 5 Replace fuse.
Battery will not 1 Bad battery cell(s). 1 Replace battery.
charge 2 Poor cable connections. 2 Check/clean all connections.
3 Faulty regulator (if so equipped). 3 Replace regulator.
4 Faulty alternator. 4 Replace alternator.
Loss of drive 1 Freewheel control in 1 Place freewheel control in
"DISENGAGED" position. "ENGAGED" position.
2 Debris on steering plate (if 2 See "CLEANING" in the
equipped), maintenance section.
3 Motion drive belt worn, damaged, 3 Replace motion drive belt.
or broken.
4 Air trapped in transmission during 4 Purge transmission.
shipment or servicing.
5 Axle key missing. 5 Install axle key at rear wheel. See
"TO REMOVE WHEEL" in the
Service and Adjustments section.
Engine "backfires" 1 Engine throttle control not sel 1 Move throttle control between
when turning between half and full speed (fast) half and full speed (fast) position
engine "OFF" position before stopping engine, before stopping engine.
Engine dies when 1 Reverse operation system (ROS) 1 Turn ignition key to ROS "ON"
tractor is shifted is not "ON" while mower or other position. See Operation section.
into reverse attachment is engaged.
30
Loading ...
Loading ...
Loading ...