Loading ...
Loading ...
Loading ...
7
Blade Screw
Blade
Washer
Blade Arm
Blade
ASSEMBLY INSTRUCTIONS
11
9. Raise the canopy, ensure the two mounting bracket
screws are aligned with the J-shaped slots in the canopy.
Then turn the canopy clockwise until the mounting
bracket screws are completely engaged in the J-shaped
slots. Install the two previously removed mounting
bracket screws in the round holes. Securely tighten all
four mounting bracket screws.
10. Remove the ve motor blocks and ten motor screws
from the underside of the motor. Discard the motor
blocks, but keep the motor screws for installation of the
blade arms.
10
9
Canopy
Round
Hole
Motor
Block
Motor
Motor Screw
Mounting
Bracket Screw
J-shaped Slot
11. Partially insert three blade screws, along with the
blade washers, through the blade and into the blade arm.
Tighten each blade screw, starting with the one in the
middle. Repeat this step for the remaining blades and
blade arms.
Motor
Screw
Blade Arm
Motor
12
12. Secure the blade arm to the underside of the motor
using the motor screws removed in Step 10. Secure each
blade arm to motor before moving to the next.
Loading ...
Loading ...
Loading ...