Loading ...
Loading ...
Loading ...
8
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Remote CradleRemote
Screw assembly screws from the
hardware bag halfway into
the motor housing. It does not
matter which two screw holes
you choose.
Connect the plugs from the upper and lower
switch housings. Make sure to line up the
colored markings on the connectors.
Partially install two of the assembly screws
found in the
hardware bag. Align the
notches in the sides of the lower switch
housing with the screws on the upper switch
housing. Twist the lower switch housing
clockwise to lock into place.
Install the last assembly screw. Tighten all three
screws securely.
Feed the wire plug through the center
hole of the upper switch housing,
then wrap keyhole slots around the
screws and twist counterclockwise.
Insert a third screw, found in the
hardware bag, into place and
then tighten all three screws.
1 of 3
1 of 3
2 of 3
Assembly Screw
Assembly Screw
Assembly Screw
BAG
BAG
BAG
2 of 3
BAG
1
STEP
4
STEP
5
STEP
6
STEP
2
STEP
3
STEP
Assembling the Switch Housing
WARNING
FAN FALL HAZARD
Make sure all three screws are tight to secure
the upper switch housing to the mounting plate.
Fan style may vary.
Note:
Assembly Screw
Want to install your fan with a light kit?
Go to
www.HunterFan.com/FAQs and click
“How do I install my fan with the light kit?”
Hunter Pro Tip:
Loading ...
Loading ...
Loading ...