Loading ...
Loading ...
Loading ...
"THREE POINT" ADJUSTMENT
(18" (45cm) HI-VAC MODELS ONLY)
Both rear wheels are adjusted by a single
lever on lhe left rear wheel,
o Pull adjuster lever toward wheel° To
raise mower, move lever forward to
desired position. To lower mower, move
lhe lever toward the rear.
NOTE; There are seven (7) height adjust-
ment positions for the rear wheels..
Both front wheels are adjusted as follows:
!.. Remove wheel, bolt, and hardware and
reassemble in desired adjustmenl hole..
2o Reinstall wheel components in the
same order as they were before re-
moval. Tighten securely.
NOTE: There are seven (7) height adjust-
ment holes for the front wtleels, Be sure
both front wheels are in the same hole.
IMPORTANT: Be sure to adjust both front
and rear wheels to the same heighL
LEVER BACKWARD
TO LOWER REAR
OF MOWER
LEVER FORWARD
TO RAISE REAR
OF MOWER
Bolt
Lockbar
(
postllon)
Wing
Washer
Lockbar
("treowheel"
position)
CASTER WHEEL OPERATION
("THREE POINT" ADJUSTMENT ONLY)
The front wheels can be "locked" into
position or set to "freewheel" for better
maneuverability.. Placing the lockbars in
the outer holes of the adjustment brackets
"locks" the front wheels. Likewise, placing
the !ockbars in the inner holes of the ad-
justment brackets al]ows the front wheels
to spin freely ("freewheeF).
• Lift Iockbar until the frontmost end clears
the adjustment bracket, then pivot lock-
bar to desired position,.
IMPORTANT: Front wheels must be
"locked" intoposition when operating on
a sloper Mow across the face of slopes:
never up and down.
TO CONVERT MOWER:
Most mowers are shipped ready to be
used as a mulchero
"REAR DISCHARGE ONLY" MOWERS
Some models have a seperate mulcher
plug, other models have the mulcher plug
built into the rear door, To convert to bag-
ging or discharging, lhe plate or plug (if
so equipped) must be removed from the
discharge opening of the lawn mower.
. Open rear door and remove mulcher
plate or plug (if so equipped). Store
mulcher plate or plug in a safe place.
. You can now install grass catcher or
optionat clipping defleclor accessory.
° To return to mulching operation, install
mulcher plate or plug into discharge
opening of mower.
,,_CAUTION: Do not run your lawn mower
without mutcher plate/plug in place or ap-
proved clipping defteclor or grass catcher
in place.. Never attempt to operate the
lawn mower with the rear door removed or
propped open,
MULCHER
"PLATE"
Slots
Mutcher
plale tabs
__i_ MULCHER
__ "PLUG"
Mutcher j...J... It{ _.JJ
plugf --/ -,.j_C..I--
MULCHER PLUG BUILT iNTO REAR DOOR
I1
Loading ...
Loading ...
Loading ...