Loading ...
Loading ...
Loading ...
F,LL,NOATES
ASREGULARSERVICEYOU COMPLETE ._'__O_._£O'£ _, ._%?._ ._%_, :_,_ _,S_.O'"
Check Brake Operation _V p _V'
Check Tire Pressure
Check Operator Presence and
T Interlock Systems
R Check for Loose Fasteners li_ V's I_
C_ Sharpen/Replace Mower Blades 1_3
T Lubrication Chart V' ll_
0 Check Battery Level 1_4
R Clean Battery and Terminals li_ li_
Check Transaxle Cooling v'
Check V-Belts V'
Check Engine Oil Level I1_ I_
Change Engine Oil (with oil filter) 1_1,2 I_
E Change Engine Oil (without oil filter) 1_1,2 I_
N Clean Air Filter _2
G Clean Air Screen 11_2
NJ Inspect Muffler/Spark
Arrester
E Replace Oil Filter (If equipped) 1_1,2
Clean Engine Cooling Fins V' 2
Replace Spark Plug V'
Replace Air Filter Paper Cartridge VB2
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures,
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-tree battery.
5 - Tighten front axle pivot bolt to 35 fb-lbs, maximum.
Do not overtighten,
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
@ Spindle Spindle
Zerk _'77' Zerk
@ Front Front Wheel
Wheel Bearing zerk
Bearing
zerk
Engine
@ Mandrel _"
Zerks
Gearshift
Pivots
(i) SAE 30 or 10w30 Motor Oil
@ General Purpose Grease
0) Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly.
15
Loading ...
Loading ...
Loading ...