Loading ...
Loading ...
Loading ...
Location Requirements
Electrical Requirements
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
WARNING
fire, or electrical shock.
NOTE:
■ The flexible exhaust hose allows placement of the air
conditioner at least 20" from window or door.
■ Confirm you are using the correct size air conditioner for
the space to be cooled, per sizing recommendations, below:
NOTE: Match BTUs to room use and location:
■ Shaded room reduce to next smaller size
■ Sunny room increase to next larger size
■ For kitchens, increase to next larger size
Recommended Grounding Method
Wiring requirement
NOTE:
Your air conditioner’s device may differ from the one shown.
To test your power supply cord:
1.Plug power supply cord into a grounded 3prong outlet.
2.Press RESET (on some devices, a green light will turn on).
3.Press TEST (listen for click; Reset button will trip, and on
some devices, a green light will turn off).
4.Press and release RESET (listen for click; Reset button will
latch, and on some devices, a green light will turn on). The
power supply cord is ready for operation.
NOTE:
■The Reset button must be pushed in for proper operation.
■The power supply cord must be replaced if it fails to trip when
the test button is pressed or fails to reset.
■Do not use the power supply cord as an off/on switch. The
power supply cord is designed as a protective device.
■A damaged power supply cord must be replaced with a new
power supply cord obtained from the product manufacturer
and must not be repaired.
■The power supply cord contains no user serviceable parts.
Opening the tamper-resistant case voids all warranty and
performance claims.
A.Test button
B
.
Reset button
TEST
RESET
A
B
This room air conditioner is equipped with a power supply cord
required by UL. This power supply cord contains state-of-the-art
electronics that sense leakage current. If the cord is crushed, the
electronics detect leakage current and power will be
disconnected in a fraction of a second.
To contact a qualified .electrical installer
It is the customer’s responsibility:
To assure that the electrical installation is
adequate and conforms to the Nation Electrical
Code,ANSI/NFPA 70-last edition,and all local
codes and ordinances.
Copies of the standards listed may be obtained from:
Nation Fire Protection Association
1 Batterymarch Park
Quincy,Ma 02169-7471
www.nfpa.org
This
portable air conditioner is equipped with a power supply
cord with a three-prong grounding plug. The cord must
be plugged into a mating, grounded three-prong outlet,
grounded in accordance with all local codes and
ordinances. If a mating outlet is not available, it is the
customer's responsibility to have a properly grounded
three-prong outlet installed by a qualified electrical
installer.
portable air conditioner must be grounded. This
Power Supply Cord
Power supply
Model
Time-delay
f
use
(or circuit br
e
aker)
115V
103.5V min.
126.5
V m
ax.
10A
13A
5K BTU
6K BTU
5
$UHDWREHFRROHG
15VT.IW
'2(&DSDFLW\NHHGHG%78V
6000 Single Hose
5000 Single Hose
7000 Single Hose
8000 Single Hose
$UHDWREHFRROHG
'2(&DSDFLW\NHHGHG%78V
10000 Dual Hose
10000 Single Hose
12000 Single Hose
8SWR-ft[15-ft room
8SWR-ft
[
2
5-ft room
25VT.
IW
8SWR
5
-ft
[
20
-ft room
30VT.
IW
8SWR-ft
[
3
5-ft room
35VT.
IW
8SWR
5
-ft
[
30
-ft room
45VT.
IW
8SWR-ft
[
5
5-ft room
55VT.
IW
8SWR-ft
[
5
5-ft room
55VT.
IW
Loading ...
Loading ...
Loading ...