Loading ...
Loading ...
Loading ...
Beforeyoucall forservice...
Troubleshooting -tips
Save time and money! Review the charts on the following pages
first and you may not need to call for service.
Washer won't operate
Possible Causes
Washer is unplugged
What ToDo
Make sure cord is plugged
securely into a_x)rking
outlet.
Watertemperature
isincorrect
Water supplyis turned off Turn both hot and cold
faucets flllly on.
Controls are not set Check controls and
properly make sure Cycle knob is
pulled out to ONposifion.
Lid is open Close lid and pull Cycle
knob out to ONposition.
Circuit breaker/fuse is
tripped/blown
Check house circuit
breakers/fllses. Replace
fl_sesor reset breaker.
Washer should have
separate outlet.
Control is not set properly Check water temperature
control and adjust.
Water supply is turned off Turn both hot and cold
or improperly connected fmlcels full}"on and make
sure hoses are connected
lo correcl [_lucels.
Water valve screens are
stopped up
Turn off tim water source
and remove fl_e water
connection hoses [ioln
the upper back of the
washer. Use a brash or
toothpick to clean the
screens in the machine.
Reconnect the hoses and
turn the water back on.
House water heater is
not set properly
Make sure house water
heater is delivering water
at 120°F.-140°F.
(48°C.-60°C.).
ii ii
15
Loading ...
Loading ...
Loading ...