Loading ...
Loading ...
Loading ...
Review this chart to find do-it-yourselif solutions for minor _dormance p,rob]ems. Any otiher
service needed should _ performed by a Sears or other qualified service representative,
[l_rical Shock Hazard
Di_o, nnect electrical supply before _vicing ,orcleaning the unit.
Failure to do so could resiu]t in electrical shock or personal injury.
POSSIBLE CAUSE POSSIBLE SOLUTION
Cleaner won't sta_.
P_,r job of di_ 1
pick-up. 2
Cleaner starts
but cuts off.
Air-Turbine Brush
Nozzle 'will not run
iwhen att_hed
Cleaner picks up
movable rugs_o,r
no=le pushes t_
hard,
Power cord won't
rewind,
1, Unplugged at wa_ outlet,
2. Tripped circuit breakedb_own _se at
househoid service panel
3 Loose hose electrica_connections,
Full or clogged dust bag,
Clogged aid_owpassages
3, Di_y fi_ter,
4, Slide switch is on MINo
5 Hole in hose
6 Canister hood o_n,
1. Hose or h,_d elec#ical conn_tions
2, Trippedoverload prote_or in canister
1 Worn or broken belt
2 Di_y brush or brush suppo_s.
1. Fui! or clogged dust bag,
2. Dirty fil_er.
3. Clogged airflow passage,
1 Suction too strong,
1. Dirty power cord,
2 Power c_ordj_med
1, Plug in fi_ly,
push the handle s_ideswitch
2, Reset ci_uit breaker or
3. Re_nn_t hose ends (p..5)
1. Change bag (p 9}.
2. Clear aidlow passages (F 6}.
3. Change filter (p. 9)
4. Adiust control (p 8).
5. Replace hose.
6. Close and I_ch hood.
2.
Check conne_ions, reconnect hose
ends (p. 5).
Ch_ge dust bag, clear aidtow
N_kage (p. 6, 9}.
Unplug cord from wail outlet and wait
20_25 minutes for motor to cool and
automatica!ly reset.
1. Check brush area for excessive lint
build-up or jamming.
2. Clean brush and brush supports
(p_l,_2)
1, Change bag (p, 9},
2, Change fiiter (p, 9),
3, Clear bi_kage from airtiow' passage
(p 6}.
1. Adjust con2ol (p 8)
1, Clean the power cord,
2, Pull out power cord and rewind,
-!3-
Loading ...
Loading ...
Loading ...