Loading ...
Loading ...
Loading ...
4 Place the Work Bowl, with
lid attached, onto the
Motor Base. Turn the bowl
clockwise to lock into place.
You should hear a click
when the bowl is properly
locked into place.
3 Place the Work Bowl Lid
on top of the Work Bowl.
Turn the lid clockwise, lining
up the arrows on the lid and
handle, to lock into place.
Place the Dual-Size Food
Pusher into the Feed Chute.
NOTE: The motor will not run unless
the lid is locked into place.
5b If you need to add liquid
while processing, unlock
the Inner Pusher by
turning the Pusher Cap
clockwise. Once unlocked,
lift the Inner Pusher and
drizzle liquid through the
narrow chute.
NOTE: Do not fill liquid ingredients
past the LIQUID MAX line.
5a Plug in the unit, then press
your desired speed to
start processing food. The
blue light will illuminate
over the speed that is
currently running.
HIGH PULSEOFF LOW
6 When you’re done, press
the OFF button. Wait until
the Chopping Blade has
come to a complete stop.
Remove the Work Bowl
by turning the handle
counterclockwise to unlock
it from the Motor Base. Lift
the bowl up o the base
and set it on a flat surface.
7 Remove the Work Bowl
Lid from the Work
Bowl by turning the lid
counterclockwise to unlock.
Carefully remove the lid
and set it aside.
OFF LOW HIGH PULSE
8 Carefully remove the
Chopping Blade and the
Blade Adaptor from the Work
Bowl and set them aside.
CAUTION: Blades are sharp! Handle
carefully. Keep fingers away from
the blade’s sharp edges. Always hold
blades by grasping the plastic areas.
9 Remove your food from the
Work Bowl using a spatula
or spoon. Dispose of any
leftover food in the bowl,
then clean the bowl, blades,
and other parts to avoid
food residue buildup.
OFF LOW HIGH PULSE
1514
Loading ...
Loading ...
Loading ...