Loading ...
Loading ...
Loading ...
22 EN EN 23
Spot Cleaning Mode
RoboVac intensively cleans a specific area in a spiral pattern, which is useful if there is a
concentrated area of dust or debris. In Spot Cleaning mode, RoboVac will stop cleaning
after 2 minutes.
•Press on RoboVac to start cleaning in Spot Cleaning mode.
Select a Suction Power Level
In the eufy Clean app, select a suction power level according to your needs:
•Quiet
•Standard (Default)
•Turbo
•Max
• When RoboVac starts cleaning next time, it will clean according to the
suction power level you previously selected.
Select BoostIQ™ feature
In the eufy Clean app, select the BoostIQ™ feature according to your needs. RoboVac will
automatically increase suction power if it detects that stronger power is needed to ensure
the best clean. BoostIQ™ is ideal for cleaning thicker carpets and hard-to-sweep messes,
which will reduce the total cleaning time but increase the noise level. If the vacuuming
noise caused by BoostIQ™ disturbs you, you can disable this feature.
Use Mopping System
• The mopping mode is only intended for a clean floor without stubborn stains
or liquids. To avoid staining floors, do not use the mopping function when
dust is mixed with liquids such as coffee or ink.
• Mopping system cleans best on smooth hard surfaces and may not perform
so well on uneven tiles, heavily waxed floors or rough surfaces like slate or
brick, which may snag the mopping module.
• The mopping mode is not recommended for use when no one is at home.
• Do not use the mopping mode on a carpeted floor. It is recommended to set
a physical barrier to avoid cleaning the carpeted area.
1
Before mopping, install the protective pad under the auto-empty station to protect
the floor.
2
Remove the mopping module.
Loading ...
Loading ...
Loading ...