Loading ...
Loading ...
Loading ...
En-4
Owner & Safety Manual
®
D.OLVG-326.000.V0
OUTLAND LIVING OWNER & SAFETY MANUAL
SECTION 1: ASSEMBLY
STEP 1a
Remove all components from the packing box. Ready the
planter base (part 1), 4x planter support tubes (part 2) and 4x
threaded feet (part 4).
STEP 1b
Spin the nuts on the 4x feet all the way down to the base of
the threaded stems.
Nut
STEP 2a
Insert (x1) planter support tube (part 2) into the planter base.
STEP 2b
Screw in (1x) threaded foot (part 4) to attach the support tube
to the base. Screw the foot all the way in to snug up the tube.
For now, keep the connection firm, but finger tight.
STEP 2c
Repeat steps 2a and 2b for the remaining (x3) planter support
tubes and (x3) threaded feet.
ASSEMBLY TIP: Set the planter base on its side so that it is
easier to install the support tube and threaded foot to the
base.
Threaded foot (4)
Note that the spring button
should face inward and that
the planter support tube is
designed to only fit one way
Loading ...
Loading ...
Loading ...