Loading ...
Loading ...
Loading ...
7
Note: Overfilling the pressure cooker
(see Instructions for Use) may clog
the pressure limit valve, which can
cause excess pressure to develop.
4. Anti-Block Cover
Prevents any food material from
blocking the pressure limit valve.
5. Pressure Relief Device
When the pressure cooker reaches
the maximum allowable pressure and
temperature, the cooking pot will
move down until lid separates from
the sealing ring, releasing air
pressure.
6. Thermostat
The power will automatically shut off
when the cooking pot temperature
reaches the preset value, or the
pressure cooker is heating without
any food inside.
7. Thermal Fuse
The circuit will be opened when the
pressure cooker reaches the
maximum temperature.
CLEANING AND
MAINTENANCE
1. Unplug the power cord before
cleaning.
2. Clean the outer body with a soft cloth
such as a paper towel or microfiber
cloth. Do not immerse the outer body
in water or pour water into it.
3. Remove the sealing ring assembly
from the inside of the lid by grasping
the knob and pulling. Set aside.
4. Remove the pressure limit valve
(figure 7) from the lid by gripping and
pulling firmly upwards. Rinse with
warm water, and dry.
5. Rinse the upper and underside of the
lid with warm water, including the air
escape on the underside and the float
valve on top. Dry completely, and
replace pressure limit valve.
6. To clean sealing ring assembly,
carefully remove flexible sealing ring
and clean with a dampened cloth or
micro fiber cloth. Do not use chemical
cleaners. Wash metal plate with warm
water, dry thoroughly and replace
sealing ring.
7. To clean the rubber
grommet in center
of sealing ring
assembly, carefully
remove it, clean it,
and replace it.
8. Replace sealing ring
assembly in lid. BE
SURE KNOB FACES OUT (figure 8).
9. Cooking pot is
dishwasher safe. To
hand-clean the pot,
use a soft cloth or
sponge and wipe.
Be careful not to
damage the inside
coating. Never use
harsh chemicals or
scouring pads.
10. To clean the condensation collector,
remove and clean it with warm soapy
water, then reinstall it (figure 9).
11. Any other servicing should be
performed by an authorized service
representative.
7.
8.
9.
Loading ...
Loading ...
Loading ...