Loading ...
Loading ...
Loading ...
8
5. Routine maintenance
Warning: Before cleaning or maintaining products, please be sure the power plug of the walking
board is pulled out.
Cleaning: Comprehensive cleaning will extend the using life of the electric walking board.
Remove dust periodically in order to keep the parts clean. Be sure to clean walking belt with both
sides of the exposed
portion, which will reduce the accumulation of impurities. Make sure to wear
clean athletic shoes to avoid carrying the dirty matters into running board and belt. walking board
belts shall be cleaned by a damp cloth with soap. And please pay attention to avoid to wet the
electrical components and walking belt.
Warning:Make sure power plug disconnect before moving motor cover away, clean the motor at
least once a year.
Running belt specialized lubricant
This walking board’s deck and walking belt has been lubricated in factory. Friction between the
walking belt and deck has a great influence to the using life and the performance of the walking
board, therefore regular applying of lubricant is needed. We advise you to check the board
regularly. If the board’s
surface is damaged, please contact our customer service center.
We advise using lubricant between walking belt and running board with following schedule:
Lightweight user (use less than 3 hours a week) once per month;
Heavyweight use (use more than 7 hours a week) once every half month.
1.In order to better safeguard your electric walking board and extend the life of the machine, it is
recommended that after your continued use of two hours, turn off the machine and let it rest for 10
minutes before using again.
2.If the walking board belt is too loose, there will be skid phenomenons while using; if it’s too tight,
it may reduces motor performance and harden the abrasion of roller and the walking belt. You can
lift two sides of the walking belt for 50-75mm when the tightness is appropriate.
Running with adjusted alignment and tightness
In order to better use the walking board and make the walking board functions work better, it is
necessary for you to adjust the walking belt into the best condition.
Running Belt alignment
⚫ Put walking board flat on the ground.
⚫ Make the walking board run at a speed of about 6-8km/hour.
⚫ If the walking belt is closer to the right, rotate the right adjusting bolt with 1/2 turn counter-
clockwise, then rotate the left adjusting bolt with 1/2 turn clockwise. (Picture B)
⚫ If the walking belt is closer to the left, rotate the left adjusting bolt with 1/2 turn counter-
clockwise, then rotate the right adjusting bolt with 1/2 turn clockwise. (Picture A)
Picture A Picture B
Loading ...
Loading ...