Loading ...
Loading ...
Loading ...
Filling The Water Tank
4
WARNING: Always unplug the unit before removing the Water Tank.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER ll the Water Tank from the top of the unit. Follow Water Tank
lling instructions in #4.
Remove Dual Directional Mist
Nozzle prior to lling the Water
Tank.
Lift the Handle on top of the
Water Tank to remove the
humidier from the Base.
Make sure the Handle is
snapped back into place, then
turn the Water Tank upside
down and remove the Tank Cap
by turning it counter clockwise.
1
2
4
3
Lift the Handle up and replace
on the humidier Base, make
sure to follow the shape of the
Water Tank and the humidier
Base so that the tank sits level
and ush to the Base. Ensure
the tank is rmly seated.
5
Attach the Dual Directional Mist
Nozzle to the top of the Water
Tank. To easily control the
direction of the mist simply
position the Dual Directional
Mist Nozzle to the desired use
as pictured to the left.
6
Filling the Water Tank:
Use clean, cool, tap water.
WARNING: DO NOT
use
extremely cold water, since it may
temporarily reduce the mist output.
WARNING:
NEVER ll with
hot/warm water or use additives
as this could damage the unit and
void the warranty.
WARNING:
If you have hard tap water use our
Humidier Demineralization
(hard water) Filters (available at
www.Air-Innovations.com) or use
ONLY ltered, distilled, cold boiled
or bottled water.
Replace the Tank Cap by rmly
turning clockwise until tight.
Turn the Water Tank upright and
check the Tank Cap for leaks.
If any water drips, remove the
Tank Cap and retighten.
WARNING: DO NOT place
Water Tank on the humidier
Base if the cap is leaking.
7
Loading ...
Loading ...
Loading ...