Loading ...
Loading ...
Loading ...
Application Guidelines/Water Supply Parameters
Service Flow 0.5 gpm (1.9 Ipm)
Water Supply Potable Water
Water Pressure 20-120 psi (138 - 827 kPa)
Water Temperature 33°F - 100°F (0.6°C - 38°C)
Capacity 200 gallons (757 liters)
California Department of Public Health Certification 14-3015.
For conditions of use, health claims certified by California
Department of Public Health and replacement parts, see
Performance Data Sheet.
It is essential that the manufacturer's recommended
installation, maintenance and water filter replacement
requirements be carried out for the product to perform as
advertised.
NOTE: While the testing was performed under standard
laboratory conditions, actual performance may vary.
Replacement Cartridge: ADQ73613402
To purchase a replacement filter, visit your local Sears
store or call 1-800-4-MY-HOME ®. Visit us on the web at
www.sears.com
Product distributed in the United States by Sears Brands
Management Corporation, Haft:man Estates, I L 60179.
3M is a trademark of 3M Company.
NSF is a trademark of NSF International.
© 2009 3M Company. All rights reserved.
To reduce the risk associated with choking: Do not
allow children under 3 years of age to have access to
small parts during the installation of this product.
To reduce the risk associated with ingestion
of contaminants: Do not use with water that is
microbiologically unsafe or of unknown quality without
adequate disinfection before and after the system.
Systems certified for cyst reduction may be used on
disinfected water that may contain filterable cysts. EPA
Establishment Number 070595-MEX-O01
To reduce the risk associated with property damage
due to water leakage:
Read and follow the Water Filter instructions before
installation and use of this system.
Installation and use MUST comply with all state and
local plumbing codes.
Do nat install if water pressure exceeds 120 psi (827
kPa). Contact a plumbing professional if you are
uncertain of how to check your water pressure.
Do not install where water hammer conditions may
occur. If water hammer conditions exist, you must
install a water hammer arrester. Contact a plumbing
professional if you are uncertain of how to check for
this condition.
• Do nat install on hot water supply lines.
The maximum operating water temperature of this
water filter system is 100°F (38°C).
• Protect water filter from freezing. Do not operate
refrigerator in ambient conditions below 55°F. Drain
water filter when storing unit in temperatures below
40°F (4.4°C).
The disposable water filter must be replaced every
six months, at the rated capacity, or if a noticeable
reduction in fiow rate occurs.
Do not install systems in areas where ambient
temperatures may go above 110°F (43.3°C).
Where a backflow prevention device is installed on
a water system, a device for controlling pressure due
to thermal expansion must be installed.
Ensure all tubing and fittings are secure and free
from leaks.
26
Loading ...
Loading ...
Loading ...