Loading ...
Loading ...
Loading ...
(362,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
1 Upshift indicator
2 Downshift indicator
3 Gear position indicator
When the manual mode is selected, the
gear position indicator and upshift indica-
tor and/or downshift indicator on the
combination meter illuminate.
The gear position indicator shows the
currently selected gear in the 1st-to-8th-
gear range. The upshift and downshift
indicators show when a gear shift is
possible. When the upshift indicator “
”
illuminates, upshifting is possible. When
the downshift indicator “
” illuminates,
downshifting is possible. When both in-
dicators illuminate, upshifting and down-
shifting are both possible. When the
vehicle stops (for example, at traffic
signals) the gear will be automatically
shifted to the 1st position and the down-
shift indicator will turn off.
Gearshifts can be performed using the
shift paddle behind the steering wheel.
To upshift to the next higher gear position,
pull the shift paddle that has “+” indicated
on it. To downshift to the next lower gear
position, pull the shift paddle that has “–”
indicated on it.
To deselect the manual mode, return the
select lever to the “D” position from the “M”
position.
CAUTION
Do not place or hang anything on the
shift paddles. Doing so may result in
accidental gear shifting.
NOTE
Please read the following points care-
fully and bear them in mind when using
the manual mode.
. If you attempt to shift down when the
engine speed is too high, i.e., when a
downshift would push the tach-
ometer needle beyond the red zone,
beeps will be emitted to warn you
that the downshift is not possible.
. If you attempt to shift up when the
vehicle speed is too low, the trans-
mission will not respond.
. You can perform a skip-shift (for
example, from 4th to 2nd) by operat-
ing the shift paddle twice in rapid
succession.
. The transmission automatically se-
lects 1st gear when the vehicle stops
moving.
. If the temperature of the transmis-
sion fluid becomes too high, the “AT
OIL TEMP” warning light on the
combination meter will illuminate.
Immediately stop the vehicle in a
safe location and let the engine idle
until the warning light turns off.
Continuously variable transmission
360
Loading ...
Loading ...
Loading ...