Loading ...
Loading ...
Loading ...
Names of Machine Parts
10
■ Needle and presser foot section
1 Needle bar thread guide (page 26)
2 Needle plate (page 41)
3 Needle plate cover (page 24)
4 Bobbin cover/bobbin case (page 24, page 104)
5 Feed dogs
The feed dogs feed the fabric in the sewing direction.
6 Presser foot
The presser foot applies pressure consistently on the fabric as
the sewing takes place. Attach the appropriate presser foot for
the selected stitch.
7 Presser foot holder (page 31)
8 Presser foot holder screw (page 31)
9 Buttonhole lever (page 56)
■ Embroidery unit
1 Frame-securing lever (page 82)
2 Embroidery unit connection (page 78)
3 Carriage (page 78)
4 Release button (page 79)
■ Operation buttons
1 “Start/Stop” button
Press the “Start/Stop” button to start or stop sewing.
The button changes color according to the machine’s
operation mode.
2 Reverse stitch button
Press the reverse button to sew reverse or reinforcement
stitches depending on the selected stitch pattern. (page 36)
3 Reinforcement stitch button
Press the reinforcement button to sew a single stitch
repeatedly and tie-off. (page 36)
For character/decorative stitches, press this button to end with
a full stitch instead of at a mid-point.
The LED beside the button automatically lights up while the
stitch is being sewn and goes off when sewing is finished.
4 Needle position button
Press the needle position button to raise or lower the needle.
Pressing the button twice sews one stitch.
5 Thread cutter button
Press the thread cutter button after sewing is stopped to cut
both the upper and the bobbin threads.
6 Sewing speed controller
Slide the sewing speed controller to adjust the sewing speed.
The sewing speed cannot be adjusted while sewing decorative
stitches or embroidering.
i
b
a
c
d
e
f
g
h
d
a
b
c
Green: The machine is ready to sew or is sewing.
Red: The machine cannot sew.
Orange: The machine is winding the bobbin thread, or
the bobbin winder shaft is moved to the right
side.
b
c
de
a
f
Loading ...
Loading ...
Loading ...