Loading ...
Loading ...
Loading ...
EN
20
Assembly
www.bora.com
Flush installation
x
764 ±2
735 ±2
519 ±2
≤ R5
≤ R5
≥ 50
≥ 50
490 ±2
≥ 600
Fig. 6.3 Dimensions of cut-out for ush installation
6,5 +0,5
14,5
10 - 50
Fig. 6.4 Dimensions of groove for ush installation
Surface installation
x
735 ±2
≤ R5
≥ 50 ≥ 50
490 ±2
≥ 600
Fig. 6.5 Dimensions of cut-out for surface installation
12,5
10 – 50
Fig. 6.6 Dimension of support for surface installation
A false floor underneath the cooktop with integrated
cooktop extractor is not needed.
The drawers and/or shelves in the floor unit must be
removable.
A return flow aperture > 500 cm
2
is required in the
kitchen units for recirculation appliances (e.g. by
shortening the plinth boards or using suitable slatted
plinths).
The power socket is underneath the device on the front.
6.3.3 Cooktop air intake
The components in the cooktop which generate heat are
automatically cooled. The warm air is extracted by fans
(cold air flow).
INFO In order to retain the full functionality of the
cooktop in the long term, there must be suffi-
cient ventilation underneath the cooktop.
INFO The performance of the cooktop is impaired or
the cooktop overheats if the warm air below
the cooktop cannot escape.
INFO If the cooktop overheats, performance is re-
duced or the cooktop switches off completely
(see Overheating protection).
INFO For sufficient air intake, an opening cross-sec-
tion in the kitchen units of at least 50 cm
2
is
recommended.
Ensure there is sufficient ventilation underneath the
cooktop.
INFO If there are plans for a cable protection floor
(false floor) below the device, this must not
impede the ventilation.
6.4 Dimensions of cut-out for
cooktop
Worktop overhang
≥50x
Fig. 6.2 Worktop overhang
Please note the worktop overhang x when creating
the worktop cut-out. Applies to flush installation and
surface mounting.
Loading ...
Loading ...
Loading ...