Loading ...
Loading ...
Loading ...
6
Installation - continued
5. Using screws supplied, fix the lower chimney bracket onto lower chimney.
6. Remove the protective plastic covering from all parts including the filters. Hang the rangehood onto the
mounting bracket.
7. Connect to the power supply and switch on the power to the rangehood. Check the functions and
operations of the switches. Connect and secure the ducting (use duct tape if required).
8. Place the two chimney pieces onto the canopy top. Extend the upper chimney to the ceiling and secure in
place with the top chimney bracket using two screws supplied.
Recirculation mode
1. This unit can be installed to operate in recirculation mode where ducting is not a chosen/desired or practical
option. There are recirculation grilles fitted on each side of the upper chimney which allow the cleansed air
to return to the kitchen. Ensure that the side outlet grilles are not obstructed. Even a partial obstruction
will restrict the efficiency of the rangehood.
2. Replace aluminium filters with charcoal filters (see Pg 7 Parts and Accessories list).
Loading ...
Loading ...
Loading ...