Loading ...
Loading ...
Loading ...
EN - 7
PROTECTING RECORDING
Normally, anything recorded on the tape is automatically erased when new recording is made. It is
possible to protect your recording from accidental erasure by removing the tabs found on the rear of
the cassette.
ERASE TAB FOR SIDE “A”
When the cassette is held with the recorded side upper-most and exposed tape facing the front, the
protective tab will be found on the left rear of the cassette.
All pre-recorded cassette are protected in this way to prevent accidental erasure of the commercial
recording. “Protected” cassette will prevent the record button from being operated. If at any time you
attempt to record and nd that this button will not depress, never force the mechanism or it may be
damaged. Check that a cassette has been loaded and that tab has not been removed.
Recording on a cassette from which the tabs have been removed can be done by covering the tab
openings with a piece of adhesive tape.
CARE OF CASSETTE MECHANISM
Gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using the unit.
A range of cassette care products are available.
PINCH ROLLER
CAPSTAN
ERASE HEAD
RECORD/PLAY HEAD
The erase head and record/play head and the surface of the pinch roller are delicate and must not
be touched with metal objects such as screwdrivers. You may nd it easier to clean the assembly by
pressing the PLAY button to bright head and pinch roller into view. Be sure to press the STOP button
after cleaning the mechanism.
Damage to the pinch wheel can occur if the unit is left in PLAY mode with the power switch o.
Under no circumstances should you attempt to lubricate any part of the machine.
CD/MP3 OPERATION
Discs for Playback
This system can playback all digital audio CD, MP3, WMA nalized digital audio CD-Recordable (CD-
R) discs, nalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format digital audio CD/
CD-R/CD-RW discs.
LOADING A DISC
1. Press the STANDBY/FUNC. button to choose CD mode.
2. Open the CD door. “OPEN” will be shown on the display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door. The total number of tracks will appear on the display after reading nished.
Loading ...
Loading ...
Loading ...