Loading ...
Loading ...
Loading ...
17
default
settings
While in the default option,
press and hold the “set” key
for three seconds to reset all
refrigerator settings to their
factory default settings.
set
(+ or -)
Selects the current menu
selection option.
water Press the “water” key to
select water. An indicator
light will be illuminated
above the active feature.
cube Press the “cube” key to select
cubed ice. An indicator light
will be illuminated above the
active feature.
crush Press the “crush” key to select
crushed ice. An indicator light
will be illuminated above the
active feature.
options
(∧ or ∨)
Used to enter and exit the
options menu and make
selections.
exit Toggles the options and run
modes.
control
locked
While in the locked state, you
will not be able to change
any settings on the display nor
dispense ice and water. The
“Control Locked” indicator
will ash and an audible
warning tone is played.
express
chill on
o
Activates a faster rate for
freezing food and increases
ice production in the freezer.
Deactivates after 12 hours.
ice maker
on o
Toggles the ice maker in the
refrigerator compartment
“ON” or “OFF”. In the “O”
state, the indicator will blink
when ice is dispensed.
display
on o
Toggles the display of the
temperature settings On
and O.
refrigerator
temp
Allows the temperature set-
points to be adjusted. Control
temperatures range from +33°F
/ +1°C to +47°F / +8°C.
freezer
temp
Allows the temperature set-
points to be adjusted. Control
temperatures range from
-6°F / -21°C to +6°F / -15°C.
mode
°F °C
Toggles display from
Fahrenheit to Celsius.
light Toggles dispenser light On
and O.
power o Press and hold for three
seconds to turn o the
cooling system. It also turns
o the ice maker and all
dispenser functions. The
display will read “powero”.
water
lter
Displays the current status of the
water lter (Good, Order, or
Replace). To reset the lter status
to “Good”, press and hold the
“set” key for three seconds.
air lter Displays the current status of
the air lter (Good, Order, or
Replace). To reset the lter status
to “Good”, press and hold the
“set” key for three seconds.
Setting cooling temperatures
(options may vary)
Options May Vary
Air Port
NOTE
The recommended settings for a product
installed in a kitchen is 37˚F for the fresh
food compartment and 0˚F for the freezer.
IMPORTANT
If your product has food freezing in the
fresh food compartment, increase the
temperature setting 1 or 2 degrees.
IMPORTANT
If you place food within 1 inch in front
of the air ports, there may be the
chance of freezing food.
Controls - Dispenser Models
Loading ...
Loading ...
Loading ...