Danby DDR2509EE - 25 BTU Dehumidifier

Owner’s Use and Care Guide - Page 5

For DDR2509EE. Also, The document are for others Danby models: DDR3009EE, DDR4009EE

PDF File Manual, 24 pages, Read Online | Download pdf file

DDR2509EE photo
Loading ...
Loading ...
Loading ...
4
1) All wiring must comply with local and national electrical codes and be installed by a
qualified electrician. If you have any questions regarding the following instructions,
contact a qualified electrician.
2) Check available power supply and resolve any wiring problems BEFORE installation
and operation of this unit.
3) For your safety and protection, this unit is grounded through the power cord plug
when plugged into a matching wall outlet. If you are not sure whether the wall outlets
in your home are properly grounded, please consult a qualified electrician. DO NOT
USE PLUG ADAPTERS OR EXTENSION CORDS.
4) The manufacturers nameplate is located on the rear wall of the water tank
compartment. The nameplate contains electrical and other technical data specific to
this unit.
5) To avoid the possibility of personal injury, always disconnect the power supply
before attempting to clean and/or service the unit.
Model Number:
DDR2509EE
Dehumidifying Capacity (Pints / Liters) 25 / 11.8
Electrical Requirements 115 Volts / 60 Hz
Power Input (Watts) 380
Rated Amperage (Dehumidifying) 3.8
Air Flow Circulation- High Fan Speed
(Cubic Feet per Minute) 180
Type of Refrigerant R22
Water Tank Capacity (Pints / Liters) 5 / 10.55
Operating Noise Level (dB A) 52
Unit Dimensions (Width x Height x Depth) 13
6
/16 x 19
15
/16 x 10
Net Weight (kg / lbs) 15 / 33.1
NOTE: Specifications are subject to change without notice, for further improvements.
ELECTRICAL SPECIFICATIONS
DDR3009EE
30 / 14.2
115 volts / 60 Hz
420
4.2
180
R22
5 / 10.55
52
13
6
/16 x 19
15
/16 x 10
15 / 33.1
DDR4009EE
40 / 18.9
115 volts / 60 Hz
525
4.8
180
R22
5 / 10.55
54
13
6
/16 x 19
15
/16 x10
15 / 33.1
UNIT SPECIFICATIONS
Loading ...
Loading ...
Loading ...