Loading ...
Loading ...
Loading ...
Building in the appliance
51
Fit the cover to the light contact
switch.
Securing the toe-kick board
and cover
Click the toe-kick board onto the
bottom of the appliance toe-kick.
Do not cover the vents in the appli-
ance toe-kick. This will damage the
appliance!
If necessary, cut the toe-kick cover to
the required length and height (cut
along the lower edge of the toe-kick
facing where it touches the floor).
Attach the toe-kick cover to the bot-
tom of the appliance.
Limiting the opening angle of
the appliance door
The door hinges are set ex works to en-
able the appliance door to be opened
wide.
If, for example, the appliance door hits
an adjacent wall when it is opened, you
should limit the opening angle of the
appliance door to 90°:
Open the appliance door.
Insert the pin into the hinge from
above.
This will limit the opening angle of the
appliance door to 90°.
Loading ...
Loading ...
Loading ...