Loading ...
Loading ...
Loading ...
6
INSTALLATION
NOTE
All set screws should be tightened and sub-ush (Allen set screw should be seated just
below the surface of the end cap) of handle end cap. The end caps should be drawn tight to
refrigerator door with no gaps.
Door Handle Mounting Instructions
1. Remove handle from carton and any other protective packaging.
2. Position refrigerator handle end caps over upper and lower pre-installed shoulder bolts (A)
that are fastened into door, ensuring the holes for the set screws are facing towards the
outside of door if a single unit installation or the freezer door (if installing the matching
freezer).
3. While holding handle rmly against door, fasten upper and lower Allen set screws (B) with
supplied Allen wrench.
4. Repeat steps 2 and 3 to install freezer handle (if installing the matching freezer). Ensure
the holes for the set screws are facing towards the refrigerator door.
A
B
Single Unit Installation
A
B
Ensure Handle Set Screws are Facing
Each Other with Doors Closed.
Matching Refrigerator and Freezer Door
Handle Installation
Ensure Handle Set Screws are Facing
Each Other with Doors Closed
Frigidaire Gallery
®
Frigidaire Professional
®
Ensure Handle Set Screws are Facing
Each Other with Doors Closed.
Loading ...
Loading ...
Loading ...